This is a similar camera to our CAM071B, but is uses a more modern CMOS sensor. It can be supplied with either a 4 pin aviation connector or a RCA and power connectors. It is designed to go in a hole in the horizontal plate the holds the number plate light. The cables with this design go straight into the vehicle and the area they go should be dry.Which it should be unless you have a leak! There is a trigger loop to turn the guidelines on or off. The camera uses a 1/3" CMOS PC4089 sensor giving a 700TVL image on an appropriate monitor. It is a 12v camera, but if used with one of our monitors with 4 pin aviation connectors it will work on a 24v vehicle.