Internal digital wireless bridge

(Inc. 20% VAT)
(£89.17 Exc. VAT)
5 in stock
200 g
Introduction to product

This is one of the newest ways of linking up your system to avoid wires running front to back. It is compatible with all our easy fit 4 pin camera systems and can be made compatible with adaptors to all our other phono based systems.

It has a transmitter and receiver. The box with the transmitter also powers the reversing camera as well as taking the signal making setting up easier. The receiver box can plug into the monitors 4 pin harness and if ordered with a 5/10/15/20m 4 pin cable can be moved to different places to make the mounting of the receiver box in a convenient space, same as the sender unit. Digital Wireless gives a better performance than analogue wireless.

The two boxes pair together to always make sure they find the best frequency to transmit on without any assistance needed from the user. The digital signal won't have the noise etc you get on analogue systems as the signal is sent digitally, similar to the way a wifi router would work. You won't be picking up someone else horse as you overtake someone with analogue wireless cameras in a horsebox.

The links take 1 signal from 1 camera so if you had 2 cameras you'd need 2 links.

These are smaller than our other digital wireless sender and receiver units see pic with 50p for scale.  They aren't waterproof boxes like the others and work on 12V instead of 12/24V like the more expensive ones.   But the performance is pretty much identical with the other ones we do.

This model has now been replaced by our WB60TXRX which offers a more rugged and waterproof housing for the same price.



Current Consumption):160mA, Max.190mA

Operating Temperature: -10~+60 C

Storing Temperature:-30~+85 C

Operating humidity:85%RH

POWER ON Time:2S Max.

Video Delay time:150mS Max.


Frame Rate:VGA:30f/s/D1: 25f/s

Video Codec:MPEG4

Video in System:PAL/NTSC Auto detection

Voice Sample Rate:16KHz/12BIT ADC ADPCM/PCM


Operation Frequency:2400 ~ 2525MHz*

Transmitter Consupmtion:20dBm

RF Bit Rate:4Mbps


Working Range:>200M

Receiving Sensitivity:--88dBm@4MHZ

Bar Code
12 volt
Connector type
4 pin aviation