Ford Custom Dual Lens Brake Light Reversing Camera

The Ford Custom dual lens camera comes in 2 types depending on the age of the vehicle. The early models used a bulb for illumination and the late ofne used LEDs. You can select which version using the drop down menu. The camera uses the lastest 700 TVL CMOS sensor giving a good colour image during the day. At night the reversing lens has IR LEDs to illuminate the area behind the van. This will give a good black and white image especially if there is additional lighting from street lights. The rear facing lens is for always on use. At night you will get a usable black and white image as long as there is background illumination. The brake light cameras are popular as no holes need to be drilled in the vehicle.

Driving camera (upper camera)

• Sensor: 1/3 PC4089 CMOS
• Effective Pixels: 976(H) x 592(V)
• TV line: 580 TVL
• TV system: NTSC/PAL depending on the batch  (if important please email to check)
• Lens: 2.6mm
• Min illumination: 0.1 LUX
• Waterproof: IP68
• View angle: V 65 degrees, H 80 degrees D 105 degrees
• Camera lens adjustment: 20 degrees up and down
• Voltage: 12 volts
• Current consumption: 150mA
• Operating temperature: -20 to 70 degrees C
• Certificates: FCC, CE, E-mark, RoHS
• Connector: 4 pin aviation

Reversing camera (lower camera)

• Sensor: 1/3 PC4089 CMOS
• Effective Pixels: 976(H) x 592(V)
• TV line: 700 TVL
• TV system: NTSC/PAL depending on the batch  (if important please email to check)
• Lens: 1.9mm
• Min illumination: 0.0 LUX (IR LED on)
• IR LEDs: 8 pcs
• Night vision: 10m
• Waterproof: IP68
• View angle: V 85 degrees, H 130 degrees D 160 degrees
• Camera lens adjustment: 20 degrees up and down
• Voltage: 12 volts
• Current consumption: 150mA
• Operating temperature: -20 to 70 degrees C
• Guideline: Optional (some have a trigger wire to select)
• Certificates: FCC, CE, E-mark, RoHS
• Connector: 4 pin aviation