7 inch dash monitor and silver CCD reversing camera with sound
7 inch dash monitor and silver CCD reversing camera with sound
7 inch dash monitor and silver CCD reversing camera with sound
7 inch dash monitor and silver CCD reversing camera with sound
7 inch dash monitor and silver CCD reversing camera with sound

7 inch dash monitor and silver CCD reversing camera with sound

£178.00
(Inc. 20% VAT)
(£148.33 Exc. VAT)
In stock
+
Weight
2.10 kg
Introduction to product

This is the same camera as our CAM022 but in silver and with sound. It also uses a stainless steel bracket and the 700TVL CCD sensor. It is aimed at people with silver coloured vans. The camera gives a good colour day view and at night goes to black and white. The monitor is a heavy duty one which is popular amongst HGV drivers and farmers. The optional stand style bracket is useful in vehicles with a moulded dash board where the mounting fingers will bend to shape. People also rotate the stand 180 degrees and mount it above the windscreen if there is a suitable mounting point.

Specification of monitor
  • Resolution : 800 x R.G.B x 480
  • Aspect Ratio : 16:9 image
  • 3 way video input , 2 way audio input, with AV-IN
  • Power Supply : DC 9V-32V
  • System : PAL / NTSC Auto-Switching
  • OSD Menu , Remote Control
  • Built-in loudspeaker
  • Varying languages display
  • With stand & U shape bracket
  • Light sensor automatic adjustment
  • Size of main body 180mm (W) x 121mm (H) x 23mm (deep)
  • Digital colour panel with long life LED backlight
Specification of camera
  • 1/3 700TVL SONY CCD
  • Video System:- PAL
  • Pixels:- PAL:752(H)*582(V)
  • Horizontal Resolution:-700 TVL
  • Min Illumination:- 0.001Lux (0 Lux IR on)
  • SNR:- ≥50dB
  • Electronic Shutter:- 1-1/10000(S)
  • Video Output:- 1.0V±0.5Vp-p 75Ω
  • View Angle:- 120°  (Unless stated otherwise in information tab)
  • Working Voltage:- DC9V-12V±0.5V
  • Consumption:- 70mA±10%
  • Waterproof Rate:- IP68
Explanation of our options

On all of our reversing camera systems we have a wide variety of cable and power options. The information below shows you what each option means.

5m 7.5m 10m 12.5m 15m 20m

These are our standard 4 pin extension cables. These options allow you to select what length you need. They are listed in metres, to get the length in feet simply multiply by 3 to change. Having longer than you need will not affect the picture, any extra cable should be coiled loosely where it cannot get damaged.

10M 8mm link, 12.5M 8mm link, 15M 8mm link

These are our 12.5m or 15m cables with an 8mm link at the front of the cable - designed to disconnect to help running through any tight gaps, then reconnected at the end of the install once you are next to the monitor.

8mm link for reversing camera extension cable

Lighter plug

A lighter plug is a useful aid to testing as system before you fit it. Some people will run their system off a lighter plug instead of hard wiring it in.

Bailey adaptor

We do an adaptor to fit the Waeco cables that are pre-installed in Bailey Motorhomes. It converts their cable into our standard 4 pin ones. We have single camera and dual camera versions.

Waeco cable adaptor

Stand style bracket

Stand style bracket

This is useful on our HD series of monitors where a curved dash makes mounting the U-bracket difficult. It also makes it faster and easier to remove the monitor.

Easy wire fuse tap a.k.a "piggyback fuse holders"

These can be used to take power from the fuse board. The earth should be to a point where there is bare metal to the vehicle body. The cable is about 2M long and terminates in a 2.1mm/5.5mm power plug, which fits in to the corresponding socket on the monitor wiring.  We stock these in different blade sizes, please select the type of fuse tap that is fitted to your fusebox.

Fuse tap

 

Model
HD7033
Bar Code
5060342251480
Colour
Silver
Voltage
12/24 volt
Screen size
7" diagonal
Connector type
4 pin aviation
TVL
700 TVL
Sensor manufacturer
Sony
Sensor size
1/3" sensor
Camera angle
120 degrees
Categories