7 inch dash monitor and 600TVL number plate frame reversing camera

The 7 inch dash rear view monitor and 600 TVL number plate frame camera is a popular option. The important factor to consider is the frame of the camera has to be on a perfectly flat surface. The camera uses a metal body which we find gives it an excellent seal against water. We find plastic bodied versions of this camera tend to leak fairly quickly. The camera itself has some adjustment up and down to suit. It has a 600 TVL CMOS sensor inside. In our view these modern CMOS sensors give as good an image as the CCD versions which are now going out of production. The 4 high power IR LEDs gives it good night vision. The number plate frame is plastic and the number plate is held in place by springs. The monitor has a 800 x 480 digital colour panel making it a good match to the high resolution of the camera.

• Resolution : 800 x R.G.B x 480
• Aspect Ratio : 16:9 image
• 3 way video input , 2 way audio input, with AV-IN
• Power Supply : DC 9V-32V
• System : PAL / NTSC Auto-Switching
• OSD Menu , Remote Control
• Built-in loudspeaker
• Varying languages display
• With stand & U shape bracket
• Light sensor automatic adjustment
• Size of main body 180mm (W) x 121mm (H) x 23mm (deep)
• Digital colour panel with long life LED backlight

TV System: PAL
Effective Pixels: 960 (H) x 576 (V)
Resolution: 600TV Lines
Sensing Area: 4.880mm x 3.670mm
Scanning System: 2:1Interlace
Sync. System: Internal
Minimum Illumination: 0 lux(LED ON)
Horizontal Sync. Frequency: 15.625KHz
Vertical Sync. Frequency: 50Hz
Video Output: 1.0vp-p, 75Ohm
Gamma Consumption: 0.45
AGC: Auto
S/N Ratio: Better than 43.3dB
White Balance: Auto
Electronic Shutter: 1/50(PAL) ~ 1/10,000 Seconds
BLC: Auto
Power Supply: DC12V
Operating Temperature: -20°C~70°C , RH95% MAX
Storage Temperature: -40°C~80°C, RH95% MAX
Lens Angle: 150° Approx (real world may be different as monitors crop the image)