Dual voltage CMOS Reversing Camera System

With the economy feeling the strain we have introduced this kit offering excellent value for money. It uses our dual voltage 7" colour monitor offering 800 x 480 pixels (2400 x 480 dots). It is matched to our quality CMOS PAL bracket camera which has a 1/3" CMOS sensor. Although not quite matching a CCD camera in terms of night vision it does give a usable image. A 2 year guarantee with us reflects our confidence in the systems reliability. The system comes with a 15m cable and an instruction booklet. It uses 4 pin aviation connectors and the camera is powered from the monitor meaning it can be turned on and off as required. There is also a trigger wire which if attached to the positive of the reversing light will turn it on automatically when you go into reverse. For better night vision we offer a CCD version of the camera which is the HR705 in the link below.

•    Screen size:7 inch (diagonal length)
•    Brand new LCD panel, high resolution
•    [16 : 9 ] wide screen display
•    2 video inputs
•    PAL & NTSC auto-switching
•    Resolution:800 x R.G.B x 480 dots
•    Power supply: DC 12 V/24V auto switching
•    Remote control, OSD menu;
•    4 PIN connectors
•    View angle range:(left/right) 65º (top) 40º (down) 15º
•    Grid lines operate on channel 2 with reverse light trigger (can be switched off)

Supplied with quick release style bracket and 8mm disconnect point for easy removal of monitor.

• Image sensor:- PC7070
• Video system:- PAL or NTSC - see information tab for which type.
• Effective pixels:- PAL 580 x 510 NTSC 510 x 492 (H x V)
• Horizontal resolution: 420 TVL
• Min illumination: 0.01 Lux (0 LUX with IR on)
• Electronic shutter:- 1/50 - 1/10000
• Video output:- 1.0V +/- 0.5Vp-p 75 Ohms
• Viewing angle: 120 degrees (unless specified in information tab)
• Consumption:- 100 mA +/- 10%
• Waterproof rating IP68
• Stainless steel bracket
• Supplied with RCA connectors (we have 4 pin by special order)