Vito brake light reversing camera

This is a new camera in for the Vauxhall Vito from 2014 onwards. It slots behind the existing high level brake light. We will be adding the specification shortly. The camera comes with a 10m lead that terminates in RCA connections. We can supply a suitable adaptor to convert it into a 4 pin connector.

Image Sensor: 1/4 420 TVL Aptina HD Colour CMOS
TV System: NTSC 
Effective Pixels:720*576
Sensing Area: 5.961mm x 4.276mm 
Scanning System: 2:1 Interlace 
Sync. System: Internal 
Resolution:600 TV lines 
Minimum Illumination:0.01 Lux 
Video Output:1.0vp-p,75Ohm 
Gamma Consumption: 0.45 
AGC: Auto 
S/N Ratio:> 48dB 
White Balance: Auto 
Electronic Shutter: 1/50Sec-12.5μSec (PAL) / 1/60Sec-12μSec (NTSC) 
BLC: Auto 
Current Consumption:50mA 
Power Supply:DC9V-15V 
Operating Temperature: -20~+70 RH95% Max

Storage Temperature: -40~ 80 RH95% Max 
Lens:1.7 mm lens
Lens Angle:170°

Please note the specification sheet that comes with the camera is not correct.