Advanced Search
Colour:
Cable length:
Colour:
Vehicle:
Voltage:
Screen size:
Screen resolution:
Connector type:
TVL:
Special features:
Type of sensor:
Recently Viewed

Heavy duty 7 inch CCD reversing camera system with 2 cameras

Heavy duty 7 inch CCD reversing camera system with 2 cameras
  Zoom
Our Price:  £195.00(Inc. 20% VAT)(£162.50 Exc. VAT)
+
Colour:  
Cable length:  
Lighter plug:  

Model:  HR705B5dual
Bar Code:  5060342256928
Colour:  Black or white bodies available
Vehicle:  Van, HGV, Tractor
Voltage:  12/24 volt
Screen resolution:  800 x 480 pixels
Connector type:  4 pin aviation
Special features:  Optional grid lines


This series of systems matches two of our standard CCD reversing cameras with our best 7 inch high resolution rear view monitor. It is a heavy duty system ideal for all vehicles and is designed for constant use. The high resolution screen gives a crisp clear image and our CCD reversing cameras produce good day and night images. It is a very simple system to wire in as it consists of just the cameras, a locking extension cable and the monitor. All the locking connectors are waterproof for increased reliability.

  •    Screen size:7 inch (diagonal length)
  •    Brand new LCD panel, high resolution
  •    [16 : 9 ] wide screen display
  •    2 video inputs
  •    PAL & NTSC auto-switching
  •    Resolution:800 x R.G.B x 480 dots
  •    Power supply: DC 12 V/24V auto switching
  •    Remote control, OSD menu;
  •    4 PIN connectors
  •    View angle range:(left/right) 65º (top) 40º (down) 15º
  •    Grid lines operate on channel 2 with reverse light trigger (can be switched off)

Supplied with quick release style bracket and 8mm disconnect point for easy removal of monitor.

  • 1/3 700TVL SONY CCD
  • Video System:- PAL
  • Pixels:- PAL:752(H)*582(V)
  • Horizontal Resolution:-700 TVL
  • Min Illumination:- 0.001Lux (0 Lux IR on)
  • SNR:- ≥50dB
  • Electronic Shutter:- 1-1/10000(S)
  • Video Output:- 1.0V±0.5Vp-p 75Ω
  • View Angle:- 120°  (Unless stated otherwise in information tab)
  • Working Voltage:- DC9V-12V±0.5V
  • Consumption:- 70mA±10%
  • Waterproof Rate:- IP68

On all of our camera systems we have a wide variety of cable and wireless options. The information below shows you whet each option means.

5m 10m 12m 15m 20m

This are our standard 4 pin extension cables. These options allow you to select what length you need. They are in metres so multiply by 3 to change into feet. Having longer you need will not affect the picture and any extra cable should be coiled loosely where is cannot get damaged.

15m 8mm

This is our 15m cable with an 8mm link. This is useful if you need to thread a cable front to back through a monitorhome and want to keep the size of the hole needed small.

15m extension cable with 8mm link

Bailey adaptor

We do an adaptor to fit the Waeco cables that are pre-installed in Bailey Motorhomes. It converts their cable into our standard 4 pin ones. We have single camera and dual camera versions.

Waeco cable adaptor

CAB011S

This is our medium duty trailer link suitable for caravans and farm trailers.

Medium duty trailer link

CAB011

This is our heavy duty trailer link as used on heavy goods vehicles.

Heavy duty trailer link

Internal wireless bridge

This is a version of our wireless bridge that will create an interference free digital wireless system..

External digital bridge

This is a version of our interference free waterproof digital bridge to create an interference free wireless system.

Stand style bracket

Stand style bracket

This is useful on our HD series of monitors where a curved dash makes mounting the U-bracket difficult. It also makes it faster and easier to remove the monitor.

 

 

Be the first to Write a Review for this item!