Advanced Search
Cable length:
Screen size:
Screen resolution:
Connector type:
Type of sensor:
Recently Viewed

5 inch stand on dash monitor and Ford Transit CMOS number plate light camera

5 inch stand on dash monitor and Ford Transit CMOS number plate light camera
Our Price:  £132.00(Inc. 20% VAT)(£110.00 Exc. VAT)
Cable length:  
Lighter plug:  
Monitor bracket:  

Model:  HD5FT01B5
Bar Code:  5060342256751
Vehicle:  Van
Screen size:  5" diagonally
Screen resolution:  800 x 480 pixels
Type of sensor:  CMOS

This matches a CCD Ford Transit number plate light reversing camera to our popular MON5001 stand on dash colour rear view monitor. The camera replaces the number plate light so no holes need to be drilled. The CMOS sensor keeps the cost of the kit down. It can be wired in so that it comes on when the reverse gear is selected.

  • 3 video inputs, 2 audio inputs, AV in jack
  • Option PAL or NTSC
  • Resolution 800 x ( R G B ) x 480 pixels (note 2400 x 480 points using the Chinese definition of resolution)
  • Power supply 12v - 24v
  • Remote control with OSD menu
  • Built in speaker
  • Contrast, colour and brightness adjustable
  • 5" colour digital TFT display
  • U-shaped bracket with optional stand or suction mount
  • 4 pin connectors to the cameras
  • Image sensor:- PC7070
  • Video system:- PAL or NTSC - see information tab for which type.
  • Effective pixels:- PAL 580 x 510 NTSC 510 x 492 (H x V)
  • Horizontal resolution: 420 TVL
  • Min illumination: 0.01 Lux (0 LUX with IR on)
  • Electronic shutter:- 1/50 - 1/10000
  • Video output:- 1.0V +/- 0.5Vp-p 75 Ohms
  • Viewing angle: 120 degrees (unless specified in information tab)
  • Consumption:- 100 mA +/- 10%
  • Waterproof rating IP68


On all of our camera systems we have a wide variety of cable and wireless options. The information below shows you whet each option means.

5m 10m 12m 15m 20m

This are our standard 4 pin extension cables. These options allow you to select what length you need. They are in metres so multiply by 3 to change into feet. Having longer you need will not affect the picture and any extra cable should be coiled loosely where is cannot get damaged.

15m 8mm

This is our 15m cable with an 8mm link. This is useful if you need to thread a cable front to back through a monitorhome and want to keep the size of the hole needed small.

15m extension cable with 8mm link

Bailey adaptor

We do an adaptor to fit the Waeco cables that are pre-installed in Bailey Motorhomes. It converts their cable into our standard 4 pin ones. We have single camera and dual camera versions.

Waeco cable adaptor


This is our medium duty trailer link suitable for caravans and farm trailers.

Medium duty trailer link


This is our heavy duty trailer link as used on heavy goods vehicles.

Heavy duty trailer link

Internal wireless bridge

This is a version of our wireless bridge that will create an interference free digital wireless system..

External digital bridge

This is a version of our interference free waterproof digital bridge to create an interference free wireless system.

Stand style bracket

Stand style bracket

This is useful on our HD series of monitors where a curved dash makes mounting the U-bracket difficult. It also makes it faster and easier to remove the monitor.



Be the first to Write a Review for this item!